What the 2nd Layer MOLLE Adds to Your Pincer Placard
The Pincer Placard 2nd Layer MOLLE is a low-profile adapter that attaches to the front of an Agilite Pincer Placard. It adds a full MOLLE field across the front and side MOLLE loops on both edges. This turns a clean placard into a modular mounting platform for pouches, EUDs, or other mission-essential items without increasing bulk.
Pincer Placard 2nd Layer MOLLE at a Glance
- Pincer™ Placard 2nd Layer MOLLE: Adds a MOLLE layer to Pincer™ Placard and transforms it into a low profile but fully modular mounting platform. If you need to carry extra gear on your placard but want to keep a low profile, this is the solution.

Pincer™ Placard 2nd Layer MOLLE - Pincer™ Placard 2nd Layer MOLLE: Includes side MOLLE, ideal for mounting pistol, multitool or similar pouches. Side MOLLE lets you place small pouches where they won't interfere with your primary magazine draw.
- Pincer™ Placard 2nd Layer MOLLE: Stiffened throughout in order to hold heavy items such as 40mm Grenades or large EUD devices. The stiffened construction prevents sagging when you load heavier gear.
How to Attach the 2nd Layer MOLLE to Your Pincer Placard
The 2nd Layer MOLLE is designed to connect directly to the front of the Pincer Placard. No additional hardware is required.
Make sure you have the Pincer Placard (sold separately) before starting.
- 1. Align the adapter with the placard: Place the 2nd Layer MOLLE against the front face of the Pincer Placard. The hook-and-loop fasteners on the back of the adapter should mate with the loop field on the placard.
- 2. Press firmly to secure: Apply even pressure across the entire surface to ensure full hook-and-loop engagement. The attachment is quick and requires no tools.
- 3. Verify the side MOLLE is accessible: Once attached, check that both side MOLLE columns are free and unobstructed. These are ready for pistol, multitool, or similar pouches.
Using the Side MOLLE Slots Effectively
The side MOLLE on the 2nd Layer MOLLE is one of its most useful features. It gives you two columns of webbing on each side of the placard. These are ideal for items you want to reach without changing your primary grip: a pistol pouch, a multitool sheath, or a small admin pouch. Because the side MOLLE sits close to the body, it keeps your front profile clean for prone shooting or vehicle work.
Load Considerations and Capacity
The stiffened construction allows the 2nd Layer MOLLE to carry heavier items like 40mm grenades or large EUD devices without drooping. However, keep in mind that adding weight to the front of your carrier shifts your center of gravity. If you load heavy items, balance them with a counterweight on the back of your carrier. The adapter itself weighs only 3.12 oz (88 g), so it doesn't add noticeable mass on its own.
Color and Material Choices
The 2nd Layer MOLLE is available in seven colors: Multicam, Ranger Green, Black, Coyote Brown, M81 Woodland, Multicam Black, and Wolf Grey. It's made from Cordura Laminate 500D/1000D, polypropylene, hook-and-loop fasteners, and nylon binding. Choose a color that matches your Pincer Placard and carrier for a uniform look.

